Freeze Dryer / Lyophilizer
Model No. ISI-058
Used for drying of heat sensitive materials by sublimation of the pre- frozen material at a low pressure (high vacuum).Reduces moisture content to less than 5% which can be further reduced to 1% by secondary drying.
User includes research, quality & development labs in Pharma & Chemical manufacturing companies; Botany , Zoology, Bio Technology & Microbiology labs; Chemical & Chemical Technology labs; Teaching & Research Institutes; Food processing industries; etc.....
- Easy to operate...
- Quick Drying...
- Low noise...
- CFC Free...
|
Specification
Model No.
|
Min. Temp
|
Drying Chamber
Height x dia.mm
|
Cold trap
Height x dia. mm
|
Ice condensing capacity in kg
|
Vacuum pump capacity
|
Power Supply
|
|
ISI 058A
|
-40oC
|
255x150
|
350x150
|
4kg
|
100 liters/ min
|
1 Phase
|
|
ISI 058B
|
-80oC
|
INSCIN's Lyophilizer / Freeze Drier is with...
- Temperature range: -40oC/-80oC .
- Floor model with wheels.
- Drying chamber is cylindrical, made of thick gauge 304 Grade Stainless steel.
- Lid: Made of thick gauge acrylic.
- Port: 8 Ports with total of 12 manifold and quick seal valves (include, 4 spare).
- Cold trap size is cylindrical, made of thick Gauge 304 grade stainless steel, front panel made of acrylic (visible).
- Built in Vacuum Pump: 2 stage direct drive, 100 liters per minute.
- Vacuum pump make: Hindhighvac. Vacuum Indication is by Pirani Gauge. Vacuum Level is Up to 0.001 mbar.
- Top & front made of stainless steel and other sides made of mild steel with Powder coated.
- Digital Microprocessor based temperature indicator.
- Dual display to view the Processing & Set Value simultaneously.
- Display resolution of 0.1oC.
- Temperature controlling accuracy not applicable.
- Class A, Three wire, PT 100 Sensor for accurate measurement of temperature.
- Insulated with Foam.
- Built in long life fully balanced refrigeration system with hermetically sealed compressor and air cooled condenser, filled with CFC Free refrigerant.
- Low noise Single stage refrigeration system for temperature up to -40oC and Double stage cascade system for temperatures below -40oC.
- Facility for water drain.
Optional
- Voltage Stabilizer.
- Calibration Certificate from NABL Certified Lab.
- Tray if required.
- Higher capacity drying chambers Up to 20kg per cycle test.
- Tray type drying chambers.
|
